A. MOBILE FOAM UNIT (1)

TECHNICAL DATA
MODEL MF-A Fiber Glass Tank
MF-S Stainless Steel
FOAM CONCENTRATE MF-A: 160 litres
STORAGE CAPACITY MF-S: 140/160/180 litres
FOAM INDUCTOR Model IE
Capacity: 225 or 450 lpm
@7 & 12 kg/sq.cm 3% induction
Material: Standard supply –
Stainless steel 304 (CF8)
Optional- Stainless Steel 316
(CF8M) or Bronze
End Connection: 2.5 inch
instantaneous coupling
Induction: 3% AFFF or ARAFFF
Approval: FM Approved
Refer catalogue HD 262
BRANCH PIPE Model BP
Capacity: 225 or 450 lpm
Material: Aluminium
End Connection: 2.5 inch Male
Instantaneous Coupling
Foam Type: AFFF or ARAFFF,
3% induction
Approval: FM Approved
Refer catalogue HD 196
OPTIONAL SUPPLY UL Listed Hoses or ISI Hoses,
with instantaneous coupling,
15 meters long (2 units)
Foam Concentrate
TANK MATERIAL MF-A: Fiber Glass Tank
MF-S: Stainless Steel 304 is
standard supply,
Stainless Steel 316 is
optional supply.
WHEEL Rubber wheel
FINISH MF-A: Yellow
MF-S: Red
APPROVALS Inductor & Branch Pipe are
FM Approved
ORDERING Specify:
INFORMATION 1) Model, Flow & Pressure
through Inductor
2) Type of concentrate &
hose requirement

Description

A. MOBILE FOAM UNIT (1)
A. MOBILE FOAM UNIT (1)

APPLICATION
Mobile Foam Unit is used for effective quick application  of foam to fight spill fires in high risk areas such as storage tanks, loading terminals, port areas and similar high risk zones. The unit is fitted with FM Approved Inline Foam Inductor. The FM Approved “BP”
series Branch Pipe provides fast and effective foam coverage. SPECIFICATION It is a self contained unit with foam inductor, foam
branch pipe, foam concentrate storage tank, and two length of fire hoses. It requires only connection to a suitable water supply. It is easy to operate, move and requires minimum manpower. Foam concentrate storage tank is made out of fiber glass or stainless steel. The foam branch pipe and fire hoses are mounted on the concentrate storage tank. The foam inductor is clamped rigidly on the storage
tank. The complete unit is mounted on two wheels with a handle for easy movement. 2.5” x 15 meters long two hose mounting arrangement is made on the unit. JULY, 2022 PAGE 2 OF 4 HD 197 HD FIRE PROTECT PVT. LTD. TESTING AND MAINTENANCE
After few initial successful tests, an authorised person must be trained to perform inspection and testing of the unit. It is recommended to carry out physical inspection of the unit, inspection should verify that no damage has taken place to any component of the unit. Each unit must be operated with full flow frequently in accordance to the guidelines of the organisation having local jurisdiction. The owner is
responsibe for maintaining the equipment in proper operating condition.  MODEL MF-A ELEVATION SIDE VIEW 962 mm Approx.
971 mm Approx. 594 mm Approx. CAUTION Appropriate guidance and training must be given to authorised person for proper operation of equipment. Application of water or foam on an electric appliance can cause injury. The water supply to unit must be increased gradually, a sudden surge of water supply to the unit must be avoided. Do not store in direct sunlight